| Title and Authors Name |
|---|
Filter-media clogging progression and replacement-interval optimisation in high-pressure coolant delivery systems for machining centres Volker Gebhardt and Ursel Hüttner Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 01-06 |
Sealing-strip wear characterisation and coolant ingress modelling in telescopic way covers of precision machine tools Vincenzo Grasso Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 07-12 |
Orifice fouling and spray-pattern deterioration in minimum-quantity lubrication nozzles under prolonged operation Zdeněk Hrubý, Věra Ihnátová and Vojtěch Illek Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 13-18 |
Indexing repeatability degradation and preventive replacement scheduling for automatic tool changer magazines Wouter Groeneveld Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 19-25 |
Taper contact-pressure loss in hollow-shank tool holder interfaces under repeated clamping and its effect on machined surface finish Unai Iglesias and Verónica Guerrero Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 26-31 |
Fault-signature identification in centralised automatic lubrication systems through flow-pulse waveform analysis Vikram Hazarika Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 32-37 |
Power-signature analytics of spindle drive motors for early detection of lubrication starvation in transmission assemblies Vasilis Iliopoulos Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 38-44 |
Sludge accumulation modelling in metalworking coolant tanks and its correlation with coolant pump cavitation onset Vaughn Griffiths and Wesley Hutchinson Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 45-50 |
Damping-capacity loss quantification in cast iron machine tool beds subjected to long-term thermal cycling Vandana Inamdar, Utkarsh Ghadge and Vishnu Ingle Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 51-56 |
Chip re-entry induced surface degradation in enclosed milling operations and design of directed chip-evacuation strategies Uri Halevi Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 57-63 |
AI-enabled smart manufacturing systems for real-time process optimization and fault detection in industry Md Mithun, Md Ariful Islam and Md Moshabbir Morshed Int. J. Mach. Tools Maint. Eng., 2026; 7(2): Part A, 64-73 |
International Journal of Machine Tools and Maintenance Engineering
Research Journals